DOBINSONS 2.2" IMS MONOTUBE STRUT LH - IMS29-50742 LH
$544.00 CAD
Skip to product information
****Coil seat should be set at 540mm(21.25") from the strut bushing eye. Picture black and white on the listing is to reference how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.***** ÂÂ
--
These provide additional travel over stock, while also increasing size and thickness to maximum possible specifications for long life and excellent on and off road performance.
Dobinsons IMS monotube shock absorbers are designed for next level performance over twin tube shocks in those hot, harsh, demanding conditions. By utilising the monotube design, Dobinsons IMS shock absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions. The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling. The micropolished, hard chromed and heat treat shock shaft, CNC aluminium high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability. Composite piston wear bands, high quality Fuchs oil and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity without the need for frequent rebuilding or servicing. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping Characteristics in each IMS shock to ensure a balance of comfort, handling, vehicle control and off-road performance - Enjoy the ride
DOBINSONS 2.2" IMS MONOTUBE STRUT LH - IMS29-50742 LH
$544.00 CAD
Product Details
- Fully re-buildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling
- 56mm/2.2€? Bodied Series
- with sway bar bracket on lower shock clevis
****Coil seat should be set at 540mm(21.25") from the strut bushing eye. Picture black and white on the listing is to reference how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.***** ÂÂ
--
These provide additional travel over stock, while also increasing size and thickness to maximum possible specifications for long life and excellent on and off road performance.
Dobinsons IMS monotube shock absorbers are designed for next level performance over twin tube shocks in those hot, harsh, demanding conditions. By utilising the monotube design, Dobinsons IMS shock absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions. The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling. The micropolished, hard chromed and heat treat shock shaft, CNC aluminium high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability. Composite piston wear bands, high quality Fuchs oil and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity without the need for frequent rebuilding or servicing. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping Characteristics in each IMS shock to ensure a balance of comfort, handling, vehicle control and off-road performance - Enjoy the ride
Care & Maintenance
Built to last, but designed to be maintained. To preserve the longevity of your purchase, we recommend regular cleaning and following the enclosed installation and care guidelines. Proper maintenance ensures these parts stand up to the rigors of the road (or the track) for years to come.
Size & Fit
We partner with a variety of brands to offer everything from direct-fit components to custom-tailored upgrades. Because every build is unique, we recommend verifying your specific Year/Make/Model against the fitment guides provided by each manufacturer.
Our goal is to ensure that whatever you’re installing looks and performs like it was made for your machine. Not sure if it’ll clear your fenders or bolt right up? Drop us a line or double-check the brand’s latest fitment notes. We’d rather help you get it right the first time than see you stuck with a part that doesn't fit.